Model | SZ-700A | SZ-950A | SZ-1300A | SZ-1600A | ||||||||
Injection unit | ||||||||||||
Screw diameter(mm) | 32 | 35 | 38 | 30 | 35 | 40 | 35 | 40 | 45 | 45 | 50 | 55 |
Screw L/D ratio(L/D) | 20 | 18.8 | 17.8 | 24.5 | 21 | 18.4 | 24 | 21 | 18.7 | 23.3 | 21 | 19.1 |
Theoretical shot volume(cm³) | 112.5 | 135 | 158.6 | 113 | 154 | 201 | 173 | 226 | 286 | 358 | 442 | 534 |
Shot weight(PS/g) | 101 | 121 | 142 | 103 | 140 | 183 | 158 | 206 | 260 | 326 | 402 | 486 |
Injection pressure(Mpa) | 203 | 170 | 114 | 249 | 183 | 140 | 235 | 180 | 142 | 219 | 178 | 147 |
Theoretical injection rate(PS,g/s) | 62 | 72 | 84 | 67.5 | 91.8 | 120 | 110 | 143 | 181 | 142 | 175 | 212 |
Plasticizing capacity(g/s) | 11 | 12 | 14 | 8.3 | 12.5 | 18 | 13.8 | 19.7 | 27.1 | 20.1 | 26.5 | 34.2 |
Screw torque(N.m) | 390 | 510 | 740 | 1250 | ||||||||
Max.Screw rotate speed(r/min) | 200 | 260 | 250 | 200 | ||||||||
Injection stroke(mm) | 140 | 160 | 180 | 225 | ||||||||
Clamping unit | ||||||||||||
Max.Clamping force(KN) | 700 | 950 | 1300 | 1600 | ||||||||
Max.Opening stroke(mm) | 290 | 340 | 400 | 460 | ||||||||
Space between tie bars(V×H/mm) | 320×320 | 360×360 | 420×420 | 480×480 | ||||||||
Mould height(mm) | 100-320 | 135-380 | 160-440 | 180-500 | ||||||||
Max.Daylight(mm) | 610 | 720 | 840 | 960 | ||||||||
Ejector force(KN) | 27 | 25.4 | 31.4 | 45.2 | ||||||||
Ejector stroke(mm) | 60 | 85 | 100 | 115 | ||||||||
Ejector quantity | 1 | 5 | 5 | 5 | ||||||||
Other | ||||||||||||
Pump motor power(kw) | 9 | 11 | 13 | 15 | ||||||||
Pump pressure(Mpa) | 14 | 16 | 16 | 16 | ||||||||
Heating power(kw) | 6.2 | 7.3 | 9.2 | 13.6 | ||||||||
Heating zone | 4 | 4 | 4 | 4 | ||||||||
Size(L×W×H/m) | 3.6×1.2×1.6 | 4.25×1.2×1.8 | 4.7×1.25×1.85 | 5.3×1.35×1.9 | ||||||||
Net weight(T) | 2.7 | 3.2 | 4.3 | 5.6 | ||||||||
Oil tank capacity(L) | 250 | 260 | 360 | 420 | ||||||||
International designation | 700-210 | 950-280 | 1300-410 | 1600-785 | ||||||||
|
|
|
|
| ||||||||
Model | SZ-2000A | SZ-2400A | SZ-2700A | SZ-3000A | ||||||||
Injection unit | ||||||||||||
Screw diameter(mm) | 50 | 55 | 60 | 55 | 60 | 65 | 55 | 60 | 65 | 60 | 65 | 70 |
Screw L/D ratio(L/D) | 23.1 | 21 | 19.3 | 22.9 | 21 | 19.4 | 21.8 | 20 | 18.4 | 22.7 | 21 | 19.5 |
Theoretical shot volume(cm³) | 491 | 594 | 707 | 665 | 791 | 929 | 598 | 712 | 836 | 848 | 995 | 1154 |
Shot weight(PS/g) | 447 | 540 | 643 | 605 | 720 | 845 | 538 | 641 | 752 | 772 | 905 | 1050 |
Injection pressure(Mpa) | 215 | 178 | 149 | 210 | 176 | 150 | 200 | 168 | 143 | 207 | 176 | 152 |
Theoretical injection rate(PS,g/s) | 145 | 175 | 208 | 176.5 | 210 | 245 | 240 | 285 | 334 | 241 | 283 | 328 |
Plasticizing capacity(g/s) | 22.5 | 28.7 | 35.4 | 26.4 | 32.5 | 40 | 38 | 45 | 52 | 35.2 | 43.3 | 51.8 |
Screw torque(N.m) | 1510 | 2000 | 2530 | 2530 | ||||||||
Max.Screw rotate speed(r/min) | 170 | 150 | 190 | 150 | ||||||||
Injection stroke(mm) | 250 | 280 | 250 | 300 | ||||||||
Clamping unit | ||||||||||||
Max.Clamping force(KN) | 2000 | 2400 | 2700 | 3000 | ||||||||
Max.Opening stroke(mm) | 500 | 530 | 550 | 590 | ||||||||
Space between tie bars(V×H/mm) | 505×505 | 555×555 | 570×570 | 610×610 | ||||||||
Mould height(mm) | 190-530 | 200-570 | 220-600 | 220-630 | ||||||||
Max.Daylight(mm) | 1030 | 1100 | 1150 | 1220 | ||||||||
Ejector force(KN) | 53.1 | 61.5 | 65 | 70.6 | ||||||||
Ejector stroke(mm) | 125 | 135 | 150 | 150 | ||||||||
Ejector quantity | 5 | 9 | 9 | 9 | ||||||||
Other | ||||||||||||
Pump motor power(kw) | 18.5 | 22 | 30 | 30 | ||||||||
Pump pressure(Mpa) | 16 | 16 | 16 | 16 | ||||||||
Heating power(kw) | 16.6 | 18.5 | 18.5 | 22 | ||||||||
Heating zone | 4 | 5 | 4 | 5 | ||||||||
Size(L×W×H/m) | 5.9×1.5×2.0 | 6.2×1.6×2.1 | 6.3×1.6×2.15 | 6.7×1.75×2.25 | ||||||||
Net weight(T) | 6.8 | 8 | 9 | 11 | ||||||||
Oil tank capacity(L) | 420 | 440 | 560 | 560 | ||||||||
International designation | 2000-1060 | 2400-1390 | 2700-1200 | 3000-1750 | ||||||||
